Packaging facilities that automatically supply and seal various products to the container (cup) and discharge them
Automatically feeds containers, products and additives into retainers that are intermittently driven by the pitch conveyor system
Available to select either the LID or film type after checking the feed status of the product and their weight
Release by sealing after confirming the status of the product
Minimize the release of defective products through monitoring and security function of the entire process
Maximize CFM performance with sophisticated safety sensors
Automatically and manually supply the subsidiary materials during the transfer process and discharge them after lid sealing
The production volume is classified by the number of containers to feed and the number of operating revolutions
Container rows can be selected from 2 to 4, 8, 10 and 12
Standard) Gerneral production capacity: 240 cups/min of 30 cycle with 8-row container
The production speed of the container can be selected 30, 40, or 50 times per minute.
Container package products
(e.g., ramen, snack, confectionery, cereal, etc.)
Feed pouch package products that are cut and supplied from a distributing machine into containers
No blockage in vacuum pads. Adopts a suction type
Direct feed into the container regardless of the size of the pouch
Robots are used and two cylinders allow stable operation
You can choose between General Loading Machine and high-speed Loading Machine
General Loading Machine (SL200) : Supplies of 260 times per minute
high-speed Loading Machine (SL300) : Supplies of 360 times per minute
Pouch Size
Width 60mm ~ 100mm
Length 60mm ~ 120mm
Weight : 2 ~ 30g (1Pouch)
*Other Size Consultation Request
Pouch type (soup broth, powder soup, vegetable sachet, noodle type)
Automatically feed the products in a retort pouch to a distributing machine
Detect any abnormality in the products such as twist, cut, etc. in the soup pouch(sachets) during auto feeding
Applicable to various kinds of products
Available for belt type and roller type; can be selected according to the characteristics of the product
Soup pouch (sachets) in the liquid, powder, or dehydrated vegetable form contained in a retort pouch
Fills a small amount of powder or dehydrated vegetables into a retort form (attached in rows with one after another)
Available for high-speed mass production with three-sided sealing
Minimized quantitative error rate by rotary drum method and volumetric method
Production capacity with up to 950 pouches per minute
* Production volume may vary depending on the nature of the contents and the film characteristics
FILM WIDE : 160 ~ 220MM
FILM DIA : 350 ~ 450mm, 3"BOBIN
FILM SPEED : 50 ~ 72M/MIN
POWER : 220V, 3P, 60HZ, 6.2 ~ 7.2KW/HR
WEIGHT : 5g~25g
Packaging material : PET/AL/PE, PET/증착/PE, OPP/AL/PE
Soup powder
Vegetable sachet
Desiccant
Coffee
Tablet, Seasoning
Various kinds of powdered tea
A facility for loading products discharged from a soup packaging machine in large capacity without twisting into a jumbo box(1,000*1,000*800)
Facilitate the production process when loading, transporting and supplying the packed soup powders
Various con'v systems are applied to enable automatic in-out emission.
Pouch Pitch: L80~95mm
A load carrying capacity: 10,000~25,000EA
Power: 220V, 60hz, 3-phase
Power consumption: Approx. 4.1 kw
Depends on the size and properties of the product.
liquid soup/soup powder, and dehydrated vegetable sachets packed in a retort pouch form
Align and load products packaged in a retort pouch into a small box or paper box uniformly without entangling them
CAPACITY: 300 pouches/min (Based on 90-pitch soup powder)
DIMENSION: 1600W X 980L X 2200H (LOAD CAPA 4,000~8,000EA)
Power: 220V, 3P, 60HZ, 1.5 KW/HR
Depends on the size and properties of the product.
liquid soup/soup powder, and dehydrated vegetable sachets packed in a retort pouch form
Available to cut out and feed even the packed forks or foldable spoons
Supply or put the products packed in a retort pouch (e.g., soup powder, liquid, dehydrated vegetables) into a separate packaging material by cutting them out
You can choose between General Soup Dispenser and high-speed soup Dispenser
Available to cut out and feed even the packed forks or foldable spoons
Detect where to cut out in a product:
1. Detect I-MARK
2. The pitch of each product is detected by the ultrasonic sensor
3. wrongly-cut sensing
Low noise and accurate cutting quality with an error margin of within 2mm
Servo motor used for supplying and cutting a product ensures high speed operation with low noise
Specially treated blades ensure long service life and excellent durability
Speed: 150~400 pouches
* The production speed varies depending on the length and physical properties of the product, and other sizes need to be discussed with us
Pouch Size
Width 60mm ~ 100mm
Length 60mm ~ 120mm
Liquid/powdered soups, and dehydrated vegetable sachets packed in a retort pouch form, Packed forks, foldable spoons, etc.